Over the years I’ve done a range of techniques to apply both natural colour (i.e. colour extracted from nature: leaves, bark, berries, plant stems) and natural patterns (i.e. leaf imprints, petals, fronds, pine needles, etc.) to both cloth and paper.

I’ve also created monoprints using commercial inks on paper.

A few years ago I read about a textile artist who buried a flat piece of cloth in the garden for a couple of months and left it to the whims of the weather, before retrieving it to see how it had survived and what colour it had taken up.  I don’t think this is a wholly uncommon exercise as I’ve heard about it several times since.

Two weeks ago I adapted this garden approach into a tray-dyeing trial with paper.  I used 2 standard kitty litter trays.

Tray 1:

  • Layer 1: Blue/grey stones
  • Layer 2: Strips of 250gsm Hahnemuhle print paper
  • Layer 3: Blue/grey stones
  • Layer 4: Strips of 250gsm Hahnemuhle print paper
  • Layer 5: Blue/grey stones
  • Periodically spray with water and alternate between sun and shade

Tray 2:

  • Layer 1: Wood chips
  • Layer 2: Strips of 250gsm Hahnemuhle print paper
  • Layer 3: Wood chips
  • Layer 4: Strips of 250gsm Hahnemuhle print paper
  • Layer 5: Wood chips
  • Layer 6: Off-cuts of paper + wood chips and stones to hold everything in place
  • Cover with clingfilm to keep moisture and stop the wind blowing the wood chips away
  • Periodically spray with water and alternate between sun and shade

Yesterday I liberated the sheets of paper, gave them a wash and ironed them dry.

Tray 1 – Layer 2:

Tray 1 – Layer 4:

Very little, if any, difference between the 2 layers of paper.  Extremely good results and very usable for future overprinting.

Tray 2 – Layer 2:

Tray 2 – Layer 4:

There’s a significant difference in the colour leeching from the wood chips on the different layers.  I was given a range of chips from different trees and I bagged them separately.  Although I wasn’t given the names of each individual wood I ensured I kept them apart when I layered.  Fantastic results.

The underside of the papers have also come out well.

And what about the off-cuts that were used to hold the main sheets down in the wood chips?

Fantastic.  There is a definite grey imprint where the stones rested.

6 responses to “Another take on natural dyeing”

  1. nice results. almost a type of marbling in some of the pics

    1. I like the more subtle marks made by the stones best, Kath. I guess the stones only touched the paper in parts, so giving a more marbled appearance, whereas the fine wood chips completely covered each sheet and created a total colour change throughout.

  2. What a great collection of related papers!

    1. I’m very happy with them, Nola, but I’d probably remove the paper in wood chips earlier to get a lighter colouring. These are quite intense. Guess it depends what you want to do with them afterwards.

  3. These are great – I much prefer them to prints which show leaf outlines but that’s because I don’t do figurative art I guess. I’ve tried this technique including rust metal in the mix and also rust metal and tea bags because I prefer the more muted tones this gives. Good luck with further experimentation!

    1. I’ve done rusted items in the past but forgot about it this time. It would be good to have another go. Years ago I used to ‘paint’ with rust. I put steel wool in vinegar and left it to form rust and coloured water, then this was painted on to paper and other things. The only issue is that it’s not very robust as the tiny flakes can drop off over time unless sealed in place. A spray starch does the job.

Leave a Reply

Latest posts

Discover more from Tactual Textiles by Claire

Subscribe now to keep reading and get access to the full archive.

Continue reading